BIKERGUARD

Safety gear – Made in EU

BIKERGUARD

Safety gear – Made in EU

推薦文

安全装備 バイカーのために作られた

雨の中でもクリアな視界!

リモコン

BIKERGUARDには専用のリモート・ワイヤレス・コントローラーが付属しており、あらゆるオートバイのハンドルバーにフィットし ます(親指が 届く範囲)。

ほとんどのヘルメットに対応

BIKERGUARDはフルフェイス、ハーフフェイス、デュアルスポーツ、モジュラーヘルメットに対応。

テンプレートをダウンロードして印刷 し、ご自分のヘルメットに合うかどうか確認してください。

BIKERGUARD

メディアで

耐久性

100 %安全なアタッチメントマウント

BIKERGUARDの着脱にかかる時間はわずか1秒だが、特殊な安全マウント機構により、高速走行時でもバイザーにしっかりと固定される。

頑丈なデザイン

IPX -6 (防水)

市場に出回っている安価な模造品とは異なり、BIKERGUARDと専用リモコンは 100%防水 だ。 すべてのユニットは出荷前に徹底的にテストされている。

品質部

ブラシレスモータ

中の最小のブラシレスモーター、 日本製 – 工業用グレード。 弊社が使用しているモーターは、エンジニアリングの驚異である。

充電池

BIKERGUARDは充電式1400mAhバッテリーで作動し、5時間から15時間の連続作動が可能。 専用のマグネット式USBケーブルを使えば、どんなUSB充電器でも充電できる。

3年保証 *

BIKERGUARDはバイカー向けに特別に設計されたプレミアム製品であり、最高品質の部品のみを使用しています。そのため、製品の品質には大変自信を持っており、本体とリモコンに2年間の保証を提供しています。(*)また、当社ウェブサイトでの無料登録により、保証期間は3年間に延長されます

BIKERGUARD

BIKERGUARD

バイカーのために作られた

BIKERGUARDセット(本体、リモコン、充電用マグネットケーブル、収納ボックス、曇り止めスクリーン、工具など)

BIKERGUARD仕様

  • 通信プロトコル 2.4GHzの独自ワイヤレスプロトコル
  • ステータスインジケータ: RGB LED
  • 材質:ポリカーボネート
  • 表面の色/仕上げ: 炭素繊維模造
  • サイズ: 146 44mm x 39mm x 57mm
  • 重量: 80 g
  • IPX定格: IPX -6 (防水)
  • モータータイプ ブラシレスサーボモーター、工業用
  • バッテリー: 1400 mAh容量のリチウムイオン
  • 充電: USBマグネットケーブル経由

リモート仕様

  • サイズ: 27 mm x 37 mm x 23 mm
  • 重量: 25 g
  • IPX定格: IPX -6 (防水)
  • 通信プロトコル 2.4GHzの独自ワイヤレスプロトコル
  • バッテリー:交換可能なCR2032
  • バッテリーステータスインジケータ: RGB LED
  • サイズ: 27 mm x 37 mm x 23 mm
  • 重量: 25 g
  • IPX定格: IPX -6 (防水)

ギャラリー

よくある質問

The BIKERGUARD underwent rigorous testing in real-world conditions, including extreme scenarios. We even dispatched a few samples to the Aprilia racing team in Italy (Slovenia is a neighboring country of Italy), who raced with the BIKERGUARD attached. The initial feedback was exceedingly positive, and we diligently considered their suggestions for enhancement. Additionally, the Piaggio group tested two samples. Currently, the Hungarian police are in the process of evaluating BIKERGUARD for potential integration into their motorcycle fleet, as are the Slovenian and German police forces. Their constant presence on the roads, regardless of weather conditions, underscores the importance of our product. We’ll soon share some photos. Lastly, BIKERGUARD underwent thorough examination by the certification authority company SIQ.

Yes it is possible to lift the visor, while BIKERGUARD is attached. In fact you should only attach it when you need it – in the rain.

Please check out this video: https://www.youtube.com/watch?v=JKwL78O3C1E

We are the original/first inventor of a mini wiper that fits directly on helmet visor, but soon after our Kickstarter campaign ended, several low-quality copies have emerged. They don’t work and are not even waterproof. BIKERGUARD is the only functioning helmet visor wiper in the world and it can not be compared to similar looking but low-quality products. For comparison – the cost of our brushless motor itself, exceeds the retail price of those (complete) low-quality wipers from AliExpress. Wipers from AliExpress use cheap $3 brushed servo motors, while we use brushless motors. Plus, BIKERGUARD comes with a dedicated remote controller. Please read our story here.

Sprays and coatings are ok but not perfect. For example, they are not efficient if you move slowly (places where the city speed limit is 30-40 mph), or in the mist if you are riding behind a car (very small water drops)… If sprays were perfect then at least super sport cars such as Porsche, Ferrari, Lamborghini would not use wipers. For now, good old physics (wipers) works best.

Yes. We designed the software and the firmware in that direction in order to have the same functions on both buttons if you run the wiper unit with or without the remote button unit. If you lose the remote control button, you can always order a new remote unit and simply pair it with a simple procedure. Only one remote can be paired with a wiper unit at a time. The battery in the remote button can be easily changed too.

The wiper blade is designed to keep your visor clean in rainy conditions – just like wipers on your car. So, it does not effectively clean bugs from you helmet visor. In fact, for optimal performance your visor should be clean (without bug remains) before usage.

Yes, it does. Pinlock pins are not in the way. If you are not using pinlock foil, and we are sure you know there is a fogging effect on the inner visor surface, we attached a free antifog foil which you can use to avoid the fogging of your visor when riding in rain or wet conditions. (it’s a free gift from us and with it you can be sure you will have best view on the road)

Just like your car wiper blades wear out, so does our wiper blade. And when that happens you can easily change it. Spare parts are available in our ONLINE SHOP in 3-piece packages.

You can switch the BIKERGUARD between your helmets. You only need to prepare each helmet visor for the use of our product. There is a tiny plastic part – a linear guide which must be permanently fixed to the helmet visor. It can be fixed using 2 tiny screws. In the package you bought we attached a second free of charge visor mount with additional screws.

The BIKERGUARD product you bought comes with a 3-year nominal warranty.

公式無料ニュースレターに登録しましょう!

BIKERGUARD(バイクガード)の最新情報をお届けします