CHECK YOUR HELMET

You can download the free PDF (M1:1) template and print it on your printer with non-scale preferences. 

Then simply cut out the template, place it on top of your visor, and check the trajectory of the viper blade.
DOWNLOAD ASSEMBLY TEMPLATE

REQUIREMENTS AND LIMITATIONS

The height of the visor should be at least 110 mm. The BIKERGUARD wiper blade moves 180 degrees – from left to right and back again. The surface of the visor should be free of any obstacles.

What if the visor has a 3D shaped upper edge or security lock on the bottom? It is perfectly OK to use BIKERGUARD, but the part between the 3D shaped edge and the lock, should measure at least 110mm.

There should not be any openings on the visor, such as air intake ports (Arai™).  Pinlock™ is not a problem.

EXAMPLES OF COMPATIBLE HELMETS

FULL FACE

OPEN FACE

FLIP-UP

EXAMPLES OF NON COMPATIBLE HELMETS

The visor is too curved.

Dirt bike helmets have goggles instead of a visor.

The visor is W-shaped, and the cut at the nose section is too high, leaving insufficient space for the BIKERGUARD blade.